Glossary

    Glossary

    Account Model (Ethereum)

    Ethereum runs an account model: every address has a stored balance that transactions debit and credit directly, the way a bank ledger works. No change outputs and no UTXO pile - balances update in place, and fees come from gas.

    FoundationsLast reviewed 2026-10-01

    What it is

    Crypto runs two accounting models, and Ethereum chose the one closer to a bank. Every address has a stored balance on the ledger, and a transaction debits the sender and credits the recipient in place - there is no pile of notes to spend and no change output to receive. The same structure hosts contract accounts: addresses holding code and storage that execute when you interact with them. Bitcoin runs the other model, a pile of unspent notes; the UTXO entry covers that side.

    The account model's consequences show up in everyday use. Balances are simple - one number per address, updated in place, which is why Ethereum wallets show clean balances and Bitcoin wallets show sums of unspent notes. Every transaction carries a nonce, a sequential number that orders transactions and blocks replays. Token balances do not even live in your account: an ERC-20 token's contract stores a mapping of address to balance, which is why token operations need ETH for gas even though the token is not ETH. The ATO's treatment is identical either way - a disposal is valued in AUD at the transaction's prices.

    Key takeaways

    • Ethereum stores a balance per address and debits and credits it directly, like a bank ledger.
    • There are no change outputs - balances update in place, and address reuse is normal.
    • Every transaction carries a nonce, a sequential number that orders them and blocks replays.
    • Token balances live in the token contract's storage, not your account - gas is always ETH.
    • The ATO treats disposals identically under either model, valued in AUD.

    How it works

    Walk one transfer. Your wallet holds 2.4 ETH and you send 0.5 ETH to a friend at $3,790 AUD - about $1,895 AUD. The network debits 0.5 ETH plus a gas fee, say 0.0004 ETH or roughly $1.52 AUD, from your account and credits 0.5 ETH to your friend's. Your balance lands at 1.8996 ETH; there is no change output and no fresh address, the balance simply updated. Two accounts, two debits and credits, one transaction.

    The nonce is the model's ordering device. Every transaction from an address carries a sequential number, starting at zero, and the network processes them in order - a gap or a duplicate is rejected. That is the replay protection: a transaction processed once cannot be processed again under the same nonce. If a transaction is stuck, a replacement with the same nonce and a higher fee can overwrite it while it waits in the mempool entry. The block-confirmation entry covers what happens after it lands.

    Contract accounts run the same structure with code attached. When you swap tokens or approve a spender, the contract's code executes and its storage updates - and the token balances live in that storage, not in your account. An ERC-20 contract maps each address to a token balance, so sending 1,000 USDT debits the mapping and credits the recipient's, with the gas paid in ETH from your account balance. Hold no ETH and the operation fails, which is the empty-wallet problem. The crypto-token entry covers the token side, and the gas-ethereum entry covers the fee.

    Why it matters

    Australian readers meet the account model constantly - every ETH transfer, every token swap, every approval runs on it. The empty-wallet problem is the practical bite: token operations fail without ETH for gas, even when the token itself is worth hundreds. Approvals are the other habit the model enables: granting a contract permission to move your tokens, which the transaction-signing entry distinguishes from sending. The model is simple; the habits it demands are specific.

    A colleague named Brent (yes, that Brent) bought a token, held zero ETH, tried to send it to a wallet, and watched the transaction fail with an inscrutable error - the token does not pay its own fees, and nobody had told him. The highest-leverage thing most Australians can do is keep a small ETH buffer - $20 to $30 AUD covers weeks of token operations - and read one transaction on a block-explorer entry to see the nonce and the balance update for yourself. Ten minutes of reading makes the model visible, and visible models stop producing surprises.

    Real-world examples

    A plain transfer, no change output

    Your wallet holds 2.4 ETH and you send 0.5 ETH - about $1,895 AUD at $3,790 - to a friend, with a gas fee of 0.0004 ETH, roughly $1.52 AUD. The network debits 0.5004 ETH from your account and credits 0.5 to your friend's. Your balance lands at 1.8996 ETH: no change output, no fresh address, just a balance updated in place. Address reuse is normal here, unlike Bitcoin's fresh-address habit - the two models reward different hygiene, and the ATO values the disposal identically in either.

    The token that cannot pay its own fees

    You hold 1,000 USDT on Ethereum - about $1,430 AUD - and zero ETH. A transfer needs gas paid in ETH from your account balance, and with none, the transaction fails before it leaves your wallet. Keeping $20 to $30 AUD of ETH covers weeks of token operations at recent gas prices. The token balance lives in the token contract's storage, so the token cannot spend itself - the fee always comes from the account, which is the empty-wallet problem in one sentence.

    The nonce in action

    Send two transactions back to back and they process in nonce order - zero, then one, never reversed. A stuck transaction can be replaced with a new one carrying the same nonce and a higher fee, which overwrites it while it waits. A duplicate nonce is rejected outright, which is the model's replay protection. The nonce is why Ethereum transactions are ordered, and ordering is why balances never double-spend - the accounting equivalent of a cheque number that cannot repeat.

    Common mistakes

    Mistake: Expecting change addresses on Ethereum.

    Why it bites you: Accounts update in place and there is no change output, so address reuse is normal. The fresh-address habit is Bitcoin's model, not this one.

    Mistake: Holding tokens without ETH for gas.

    Why it bites you: Token transfers and approvals fail without ETH in the account, regardless of the token's value. Brent's unsent token sat locked behind a $2 AUD gas bill.

    Mistake: Assuming token balances live in your wallet.

    Why it bites you: They live in the token contract's storage as a mapping of address to balance. Your wallet holds keys; the chain holds the balances.

    Mistake: Resending a stuck transaction immediately.

    Why it bites you: A duplicate nonce is rejected, and the stuck one still queues. Replace it with the same nonce and a higher fee, or wait - the explorer shows which.

    Ivy's take

    I traced one of my own token swaps through the account, the nonce and the token contract's storage so you don't have to, and the model finally clicked as a bank ledger with a public API. Balances update in place, the nonce keeps the order, and the token contract keeps the tokens. It is simpler than Bitcoin's model and more opinionated about habits.

    The empty-wallet problem is the one that catches everyone once - a token worth hundreds, gated behind a gas bill worth a coffee. I ran a dozen token operations against a fresh wallet so you do not have to, and $25 AUD of ETH covered every one of them with room to spare. Brent keeps zero buffer and blames the network; I keep a buffer and blame nobody. The model is a bank ledger; treat the ETH balance as the account's running costs, and it stops biting.

    Related jargon, defined

    UTXO
    Bitcoin's accounting model - unspent notes spent whole, with change outputs.
    Nonce
    The sequential number ordering an address's transactions and blocking replays.
    Gas
    The fee paid in ETH for computation, consumed from the account balance.
    Smart contract
    An account holding code that executes when interacted with.
    ERC-20
    The token standard storing balances in the token contract's storage.
    Contract account
    An address with code and storage, as opposed to a plain balance account.

    Frequently asked questions

    Does Ethereum use accounts or UTXO?+

    Accounts - every address has a stored balance debited and credited directly, closer to a bank ledger than Bitcoin's pile of unspent notes. Neither model is better; they trade different habits and fee mechanics.

    Why does Ethereum have no change addresses?+

    There is no change to return - a transaction debits the sender's stored balance and credits the recipient's in place. Address reuse is therefore normal, unlike Bitcoin's model where reuse links payments publicly.

    What is a nonce on Ethereum?+

    A sequential number attached to every transaction from an address, which orders them and blocks replays. A stuck transaction can be replaced by a new one with the same nonce and a higher fee.

    Why do I need ETH to send tokens?+

    Token balances live in the token contract's storage, not your account, and computation is always paid in ETH from your balance. A token cannot pay its own fees, so a small ETH buffer is the fix.

    Does the ATO treat Ethereum transfers differently?+

    No - a disposal is valued in AUD at the transaction's prices under the same CGT rules, regardless of the accounting model. Transfers between your own accounts are not disposals provided you keep control.

    Disclaimer: This information is general in nature and does not constitute financial or legal advice. Always consult a qualified professional for your specific situation.

    Keep learning

    Ivy Sinclair-Wren

    Ivy Sinclair-Wren

    Financial Chaos Analyst

    Connect on LinkedIn

    Ivy Sinclair-Wren is a Financial Chaos Analyst covering crypto markets, investing behaviour, and the Australian habit of checking prices during family dinners. Based in Melbourne, she reviews AUD Crypto Tracker's coin guides for accuracy, ATO alignment, and ruthless utility — no hype, no predictions, just what the data says.